Securing Your Data
Contents
Securing Your Data
Protecting Data with Constraints
Controlling Access to Data
DES3 Encrypting Your Data
Recital gives you the ability to encrypt the data held in Recital tables. Once a table has been encrypted, the data cannot be accessed unless the correct three-part encryption key is specified, providing additional security for sensitive data.
encrypt <tablename as character> | <skeleton as character> key <key as character>
The encrypt command is used to encrypt the data in the specified table or tables matching a skeleton. If the skeleton syntax is used, then all matching tables will be given the same encryption key. The encryption key is a three part comma-separated key and may optionally be enclosed in angled brackets. Each part of the key can be a maximum of 8 characters. The key is DES3 encrypted and stored in a .dkf file with the same basename as the table. After encryption, the three parts of the key must be specified correctly before the table can be accessed.
// Encrypt individual tables encrypt customers key "key_1,key_2,key_3" encrypt employees key "<key_1,key_2,key_3>" // Encrypt all .dbf files in the directory encrypt *.dbf key "key_1,key_2,key_3"
set encryption to [<key as character>] set encryption on | off
If a database table is encrypted, the correct three-part encryption key must be specified before the table's data or structure can be accessed. The set encryption to set command can be used to specify a default encryption key to be used whenever an encrypted table is accessed without the key being specified. The encryption key is a three part comma-separated key.
If the command to access the table includes the key, either by appending it to the table filename specification or using an explicit clause, this will take precedence over the key defined by set encryption to. Issuing set encryption to without a key causes any previous setting to be cleared. The key must then be specified for each individual encrypted table.
The default key defined by set encryption to is only active when set encryption is on. Set encryption off can be used to temporarily disable the default key. The set encryption on | off setting does not change the default key itself. Set encryption is on by default.
// Encrypt individual tables encrypt customers key "key_1,key_2,key_3" encrypt shippers key "key_2,key_3,key_4" // Specify a default encryption key set encryption to "key_1,key_2,key_3" // Open customers table using the default encryption key use customers // Specify shippers table's encryption key use shippers<key_2,key_3,key_4> // Disable the default encryption key set encryption to // Specify the individual encryption keys use customers encryption "key_1,key_2,key_3" use shippers<key_2,key_3,key_4>
encrypt <tablename as character> | <skeleton as character> key <key as character>
The decrypt command is used to decrypt the data in the specified table or tables matching a skeleton. The specified key must contain the three part comma-separated key used to previously encrypt the table and may optionally be enclosed in angled brackets. The skeleton syntax can only be used if all tables matching the skeleton have the same key.
The decrypt command decrypts the data and removes the table's '.dkf file. After decryption, the key need no longer be specified to gain access to the table.
// Decrypt individual tables decrypt customers key "key_1,key_2,key_3" decrypt employees key "<key_1,key_2,key_3>" // Decrypt all .dbf files in the directory decrypt *.dbf key "key_1,key_2,key_3"
All of the following commands are affected when a table is encrypted:
- append from - append records to the active table from another table
// The key must be specified for an encrypted source table use mycustomers append from customers encryption "key_1,key_2,key_3"; for country = "UK"
- copy file - copy a file
// The key file must also be copied for an encrypted source table // as the target table will be encrypted encrypt customers key "key_1,key_2,key_3" copy file customers.dbf to newcustomers.dbf copy file customers.dkf to newcustomers.dkf use newcustomers encryption "key_1,key_2,key_3"
- copy structure - copy a table's structure to a new table
// The key file is automatically copied for an encrypted source table // and the target table encrypted encrypt customers key "key_1,key_2,key_3" use customers encryption "key_1,key_2,key_3" copy structure to blankcust use blankcust encryption "key_1,key_2,key_3"
- copy - copy a table
// By default, the key file is automatically copied for an encrypted // source table and the target table encrypted with the same key encrypt customers key "key_1,key_2,key_3" use customers encryption "key_1,key_2,key_3" copy to newcustomers use newcustomers encryption "key_1,key_2,key_3" // You can also create a copy with a different key encrypt customers key "key_1,key_2,key_3" use customers encryption "key_1,key_2,key_3" copy to newcustomers encrypt "newkey_1,newkey_2,newkey_3" use newcustomers encryption "newkey_1,newkey_2,newkey_3" // Or create a decrypted copy encrypt customers key "key_1,key_2,key_3"; use customers encryption "key_1,key_2,key_3" copy to newcustomers decrypt use newcustomers // You can also create an encrypted copy of a non-encrypted source table use orders copy to encorders encrypt "newkey_1,newkey_2,newkey_3" use encorders encryption "newkey_1,newkey_2,newkey_3"
- dir - display a directory listing of tables
// Encrypted tables are flagged as such with (DES3) open database southwind dir
Current database: southwind Tables # Records Last Update Size Dictionary Triggers Security categories.dbf 8 01/10/09 24576 None None None cisamdemo.dbf ---> CISAM/Bridge [cisamdemo] customers.dbf (DES3) 91 05/12/09 49600 None None None employees.dbf 9 05/12/09 25520 None None None example.dbf (DES3) 100 12/24/09 38080 Yes Yes None order_details.dbf 2155 05/12/09 296320 None None None orders.dbf 829 05/12/09 232704 None None None products.dbf 77 05/12/09 37112 None None None productsbyname.dbf 77 05/12/09 29104 None None None shippers.dbf (DES3) 3 05/12/09 20864 None None None suppliers.dbf 29 12/08/09 29992 Yes None None 0.765 MB in 11 files. 1.093 GB remaining on drive.
- use - open a table
// The three part key must be specified to open an // encrypted table. All of the following are valid. // 1. Specifying a default encryption key before opening the table set encryption to "key_1,key_2,key_3" use customers // 2. Appending the key to the filename use customers<key_1,key_2,key_3> // 3. Using the ENCRYPTION clause, optionally specifying angled brackets use customers encryption "key_1,key_2,key_3" use customers encryption "<key_1,key_2,key_3>"
- SQL insert - add a row to a table
// The three part key can be specified using a // default encryption key before opening the table open database southwind set encryption to "key_1,key_2,key_3" insert into customers; (customerid, companyname); values ("RECIT","Recital Corporation") // Or by appending the key to the filename open database southwind insert into customers<key_1,key_2,key_3>; (customerid, companyname); values ("RECIT","Recital Corporation")
- SQL select - return data from a table or tables
// The three part key can be specified using a // default encryption key before opening the table open database southwind set encryption to "key_1,key_2,key_3" select * from customers // Or by appending the key to the filename open database southwind select * from customers<key_1,key_2,key_3>
- SQL update - update data in a table
// The three part key can be specified using a // default encryption key before opening the table open database southwind set encryption to "key_1,key_2,key_3" update customers; set companyname="Recital Corporation Inc."; where customerid="RECIT" // Or by appending the key to the filename open database southwind update customers<key_1,key_2,key_3>; set companyname="Recital Corporation Inc."; where customerid="RECIT"